| 367 | 8 | 91 |
| 下载次数 | 被引频次 | 阅读次数 |
为改进擦离式碾米机结构,优化擦离式碾米机碾米性能,该文采用离散元法对糙米在擦离式碾米机内的碾米过程进行了数值仿真模拟,通过正交试验法模拟分析了碾白室内不同碾筋结构参数对碾白压力的影响,提出了优化碾筋结构的方案,结果表明:对平均碾白压力影响最大的是碾筋高度,对碾辊压力影响最大的是碾筋根数,碾筋结构设计的最优参数是:根数为2、倾角为3°、高度为4 mm的组合,研究结果可为擦离式碾米机碾米性能的优化提供理论依据,也为其他颗粒加工机器的性能优化提供参考。
Abstract：In order to improve the structure of frictional rice mill and optimize its milling performance, the discrete element method is adopted to simulate the process of rice milling process in a frictional rice mill.The effect of structure of convex ribs on whiting pressure was investigated through the orthogonal experiment method.The optimal parameters for convex ribs were obtained.The results showed that the convex ribs height significantly affect the average whiting pressure, while the number of convex ribs mainly impact on the pressure in milling shaft.The optimal combination of convex ribs includes height with 4 mm, inclination Angle with 3° and number with 2.This work could provide theoretical basis for the optimization of rice milling for the frictional rice mill, as well as a reference for the optimization of performance of other granular processing machines.
[1]中国农业机械化科学研究院.农业机械设计手册:下册[M].北京:中国农业科学技术出版社,2007:1502-1506.
[2]刘建伟,徐润琪,张萃明,等.大米加工精度与碾白程度检测的研究[J].中国粮油学报,2004,19(3):5-8.
[3]顾尧臣.粮食加工设备工作原理、设计和应用[M].武汉:湖北科学技术出版社,1998:228-241.
[4]孙正和,吴守一,张兴宇,等.擦离式碾米机碾白室压力的研究[J].农业工程学报,1994,10(03):133-137.
[5]Yan T Y, Hong J H, Chung J H.An Improved Method for the Production of White Rice with Embryo in a Vertical Mill[J].Biosystems Engineering, 2005,92(03):317-323.
[6]Debandya M, Satish B.Wear of Rice in anabrasive milling operation,part I:prediction of degree of milling[J].Biosystems Engineering, 2004, 88(03):337-342.
[7]Debandya M, Satish B.Wear of Rice in an abrasive milling operation,part II:prediction of bulk temperature rise of milling[J].Biosystems Engineering, 2004, 89(01):101-108.
[8]Lim J S, Abdulmanan Z, Hashim H, et al.Towards an integrated, resource-efficient rice mill complex[J]. Resources, Conservation and Recycling, 2013, 75:41-51.
[9]Lim J S, Abdulmanan Z, Hashim H, et al.Synthesis of a sustainable integrated rice mill complex[J].Journal of Cleaner Production, 2014, 71:118-127.
[10]Mathis R, Carsten G,Andreas F.Research of iron ore grinding in a vertical-roller-mill[J]. Minerals Engineering,2014, 97(05):1-7.
[11]Gonzalez V M G, Munoz G H, Sanchez R L.Design and valuation of an extruder to convert crop residues to animal feed[J].Biosystems Engineering, 2008, 100:66-78.
[12]Wang J H, Chen Q R, Kuang Y L, et al.Grinding process within vertical roller mills:experiment and simulation[J].Mining Science and Technology, 2009, 19:97-107.
[13]Hao X D, Zhu D M, Bian Z R, et al.Numerical analysis of grinding power consumption of a vertical planetary mill[J].Journal of China University of Mining&Technology,2008, 18:311-315.
[14]屈少敏.Solidworks在碾米机螺旋输送器设计中的应用[J].河南工业大学学报(自然科学版),2006,27(01):72-74.
[15]程胜文.碾米机主轴部件的动力学分析及动平衡工艺[D].武汉:武汉理工大学,2003.
[16]袁志发,周静芋.试验设计与分析[M].北京:高等教育出版社,2000:330-339.
[17]Buggenhout J, Brijs K, Celus I, et al.The breakage susceptibility of raw and parboiled rice:A review[J].Journal of Food Engineering, 2013, 113:304-315.
[18]周福君,卢杰,杜佳兴.玉米钵苗移栽机圆盘式栽植机构参数优化及试验[J].农业工程学报,2014,30(01):18-24.
[19]韩燕龙,贾富国,唐玉荣,等.颗粒滚动摩擦系数对堆积特性的影响[J].物理学报,2014,63(08):1-7.
[20]王成军.典型农业物料在三维并联振动筛中的筛分理论与试验[D].镇江:江苏大学,2012.
[21]廖庆喜,张朋宜,廖宜涛.基于EDEM离心式排种器排种性能数值模拟[J].农业机械学报,2014,45(02):109-113.
[22]胡建平,郭坤,周春健,等.磁吸滚筒式排种器种箱振动供种仿真与试验[J].农业机械学报,2014,45(08):61-65.
[23]胡国明.颗粒系统的离散元素法分析仿真[M].武汉:武汉理工大学,2010.
[24]陈进,周韩,赵湛,等.基于EDEM的振动种盘中水稻种群运动规律研究[J].农业机械学报,2011,42(10):79-83.
[25]邱白晶,姜国微,杨宁,等.水稻籽粒流对承载板冲击过程离散元分析[J].农业工程学报,2012,28(03):44-49.
[26]贾富国,韩燕龙,刘扬,等.稻谷颗粒物料堆积角模拟预测方法[J].农业工程学报,2014,30(11):254-260.
[27]Wang M H, Yang R Y, Yu A B.DEM investigation of distribution and particle breakage in tumbling ball mills[J].Power Technology, 2012, 223:83-91.
[28]周祖锷.农业物料学[M].北京:农业出版社,1994:12-17.
基本信息:
中图分类号:TS212.3
引用信息:
[1]贾富国,唐玉荣,杨欲晓,等.基于离散元法的碾米机结构优化设计研究[J].塔里木大学学报,2020,32(02):80-89.
基金信息:
国家自然科学基金“数值化米粒碾白机理及碾米机降碎设计方法”(51575098);; 塔里木大学现代农业工程重点实验室开放课题“基于离散元法的糙米加湿调质试验研究”(TDNG20150102)
2019-11-14
2019
2020-05-19
2020
2
2020-06-15
2020-06-15