| 300 | 18 | 93 |
| 下载次数 | 被引频次 | 阅读次数 |
采棉机摘锭性能直接影响到采棉机田间作业的使用效率和经济性,结合摘锭在采摘过程中的工作状态,将摘锭简化为一悬臂梁进行力学分析,采用Solidworks软件建立了摘锭的三维实体模型,并对摘锭在脱棉过程中受到的弯曲和扭转变形基于Solidworks/SimulationXpress进行有限元分析,呈现了摘锭在此过程的应力、应变和位移分布,数值结果表明摘锭在外部环境变化引起载荷突变作用在其头部时,摘锭杆身变形较大,危险截面约在8-11个齿处,其结果为采棉机摘锭的结构设计提供参考。
Abstract：The properties of cotton picker ingot directly affected efficiency and economy during picking process in cotton field.Combined with cotton picker ingot working state during picking process,simplified ingots as a cantilever beam and analyzed with mechanics method,the 3D solid model of ingot was established using Solidworks software,based on Solidworks/SimulationXpressfinite,the bending and torsion deformation of ingot during removal of cotton process were investigated by finite element analysis method,the stress,strain and displacement distribution during removal of cotton process were determined.The numerical results showed that the ingot shaft caused a large deformation by changes in the external environment with load in the head,and dangerous section in 8 to 11 teeth,the simulated results could provide reference for structural design of cotton picker ingot.
[1]毕新胜,王维,新武传宇,等.采棉机水平摘锭的工作原理及采摘力学分析[J].石河子大学学报,2007,25(6):786-789.
[2]马娟,王维新,赵岩.滚筒式采棉机采摘头的设计与研究[J].农机化研究,2010(2):120-122.
[3]祝朋涛,魏敏,张宏文.采棉机摘锭的三维虚拟建模及有限元分析[J].农机化研究,2011(4):39-42.
[4]田丰果,吴锦行,吴艳英,等.基于UG的采棉摘锭筒的三维建模与装配[J].南方农业,2011,5(7):42-43.
[5]王伟,孙文磊.采棉机摘锭的逆向反求与五轴联动数控加工仿真[J].农机化研究,2010(9):33-36.
[6]李小利.水平摘锭式采棉机采摘机理及摘锭运动规律的研究[D].新疆大学,2011.
[7]董伟,孙文磊.梳指式采棉机的设计与关键技术研究[D].新疆大学,2009.
基本信息:
中图分类号:S225.911
引用信息:
[1]张有强,马彦,周岭.采棉机摘锭的采摘力学分析及仿真[J].塔里木大学学报,2012,24(02):31-36.
基金信息:
塔里木大学校长基金项目(TDZKSS201114)
2012-06-15
2012-06-15